Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How do you remove the internal fan resistor of the Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Interior blower
Operation: How do you remove the internal fan resistor of the Peugeot 208?

Today we will explain how to replace the internal cabin fan resistor of the Peugeot 208. The steps to follow are quite simple and fast. The first step is to remove the lower part of the dashboard on the left side. Once removed, it will be easier to access the fan resistor. The second step is to disconnect the terminals that connect the resistor to the fan, in order to remove it. Once disconnected, we remove the resistor and insert a new one. With the third step, we connect it to the terminal and the fan, and then reassemble the lower panel of the dashboard.


Posted on 30 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 208 2012-2019 - Where is the cabin fan relay located in the Peugeot 208? Read Answer
    • 208 2012-2019 - Why does the passenger compartment fan of the Peugeot 208 stop working? Read Answer
    • 208 2012-2019 - Why does the interior fan no longer work in the Peugeot 208? Read Answer
    • 208 2012-2019 - What to do if the heating fan does not work in the Peugeot 208? Read Answer
    • 208 2012-2019 - Why does the interior fan no longer work in the Peugeot 208? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos