Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin fan resistor of the Peugeot 208 located?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

The cabin fan resistor of the Peugeot 208 phase 1 model is located inside the cabin, specifically behind the steering column under the fan. To ensure that the problem with the fan turning on is the resistor, a computerized diagnosis is necessary. If the cause is the resistor, it needs to be replaced.

To perform this operation, we need to remove the steering wheel and the central dashboard of the steering column; the resistor is located on the right and to remove it, it is necessary to first unscrew the screws on the fan and then disconnect it from its connector.


Posted on 14 January 2026 by ScegliAuto


Related tutorials

How to Remove the Internal Fan Resistor of the Peugeot 208?
How to Remove the Internal Fan Resistor of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Today, you will learn how to replace the internal cabin fan resistor of the Peugeot 208. The steps to follow are quite simple and quick. The first st…
Removing the cabin fan on the Peugeot 208
Removing the cabin fan on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The following instructions will show you how to remove and replace the cabin fan on the Peugeot 208 by following these simple steps. First, get insid…
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Peugeot 208 (2012-2019 / MK 1, A9) In this video we can see how the youtuber found a solution to the malfunction of the Peugeot 208's cabin fan: instead of the connector that powers th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos