Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Solution to the malfunctioning of the Peugeot 208 cabin fan.

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

In this video we can see how the youtuber found a solution to the malfunction of the Peugeot 208's cabin fan: instead of the connector that powers the car's cabin fan, he placed a normal clamp. In fact, the connector had burned out. This causes a false contact that prevents the fan from functioning properly.

If we take the car to be repaired, it is very likely that they will dismantle half of the car just to find the fan, which in 99% of cases is not the issue. The problem is almost always the connector, so the best thing to do is to cut the cable and replace the connector with a clamp.


Posted on 18 July 2025 by ScegliAuto


Related tutorials

Where is the cabin fan resistor of the Peugeot 208 located?
Where is the cabin fan resistor of the Peugeot 208 located?
Peugeot 208 (2012-2019 / MK 1, A9) The cabin fan resistor of the Peugeot 208 phase 1 model is located inside the cabin, specifically behind the steering column under the fan. To ensure…
Removing the cabin fan on the Peugeot 208
Removing the cabin fan on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The following instructions will show you how to remove and replace the cabin fan on the Peugeot 208 by following these simple steps. First, get insid…
How to Remove the Internal Fan Resistor of the Peugeot 208?
How to Remove the Internal Fan Resistor of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Today, you will learn how to replace the internal cabin fan resistor of the Peugeot 208. The steps to follow are quite simple and quick. The first st…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos