Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the cabin fan on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

The following instructions will show you how to remove and replace the cabin fan on the Peugeot 208 by following these simple steps. First, get inside the vehicle and start by opening and removing the glove compartment, unscrewing all the fixing screws; then remove the plastic cover underneath and disconnect the electrical connector of the fan, as shown in the video.

At this point, unscrew the fixing screws to remove it from the dashboard, replacing it with the new original one; then test the operation of the new fan.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Where is the cabin fan resistor of the Peugeot 208 located?
Where is the cabin fan resistor of the Peugeot 208 located?
Peugeot 208 (2012-2019 / MK 1, A9) The cabin fan resistor of the Peugeot 208 phase 1 model is located inside the cabin, specifically behind the steering column under the fan. To ensure…
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Solution to the malfunctioning of the Peugeot 208 cabin fan.
Peugeot 208 (2012-2019 / MK 1, A9) In this video we can see how the youtuber found a solution to the malfunction of the Peugeot 208's cabin fan: instead of the connector that powers th…
Replacing the Radiator Fan Resistor on a Peugeot 208
Replacing the Radiator Fan Resistor on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today, we will look at the main steps to remove and replace the radiator fan resistor on a Peugeot 208. First, open the engine bonnet and start locat…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos