Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the AdBlue Reservoir Located in the Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: AdBlue warning light

AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it up when it is nearly empty. In the Peugeot 208, the reservoir is located just under the boot. As shown in the attached video, if you need to top up the fluid, remove the bottom of the boot, any spare wheel, and the tool tray. Right in the centre, you will see the cap of the AdBlue reservoir.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up AdBlue on a Peugeot 208?
How to Top Up AdBlue on a Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To top up the AdBlue additive on the Peugeot 208, lift the rear hatch of the boot. The cap for the additive tank is located under the mat: to access …
How to Refill AdBlue in the Peugeot 208
How to Refill AdBlue in the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) This mini guide explains how to correctly refill the AdBlue fluid in the respective tank of the Peugeot 208. Remember, the vehicle must be completely…
How to Replace the AdBlue Pump on the Peugeot 208?
How to Replace the AdBlue Pump on the Peugeot 208?
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) To replace the AdBlue pump on the Peugeot 208, lift the car using a ramp so that you can access the components underneath. The pump is located near t…

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer
    • 208 2019-2026 - What to do if the adblue light comes on in the Peugeot 208? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos