Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue in the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: AdBlue warning light

See other generations:
Video tutorial

This mini guide explains how to correctly refill the AdBlue fluid in the respective tank of the Peugeot 208. Remember, the vehicle must be completely switched off during refuelling for safety reasons. Once you have taken the necessary precautions, go to the rear of the vehicle and fully lift the bonnet.

Remove the lower panel and locate the blue cap in the central area. Unscrew it and pour the new AdBlue inside until the tank is completely full.

Finally, re-screw the cap and reposition the protective panel.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
Peugeot 208 (2012-2019 / MK 1, A9) In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as o…
How to Dismantle the AdBlue Tank on a Peugeot 208?
How to Dismantle the AdBlue Tank on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) The AdBlue tank on a Peugeot is exactly as shown in the video, which undergoes a repair intervention. To proceed with repairing or replacing it, you …
Where is the AdBlue Reservoir Located in the Peugeot 208?
Where is the AdBlue Reservoir Located in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it…

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos