Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the AdBlue Tank on a Peugeot 208?

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

See other generations:
Video tutorial

The AdBlue tank on a Peugeot is exactly as shown in the video, which undergoes a repair intervention. To proceed with repairing or replacing it, you must first lift the vehicle on a workshop ramp, then remove the panel located at the rear of the car, disconnect the various pipes present, and with the aid of a stand, remove the fuel tank, above which you will find another tank, namely for AdBlue. Remember the importance of the efficiency of the entire AdBlue system, without which the vehicle cannot be used.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Where is the AdBlue Reservoir Located in the Peugeot 208?
Where is the AdBlue Reservoir Located in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it…
How to Refill AdBlue in the Peugeot 208
How to Refill AdBlue in the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This mini guide explains how to correctly refill the AdBlue fluid in the respective tank of the Peugeot 208. Remember, the vehicle must be completely…
How to Replace the AdBlue Pump on the Peugeot 208?
How to Replace the AdBlue Pump on the Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To replace the AdBlue pump on the Peugeot 208, lift the car using a ramp so that you can access the components underneath. The pump is located near t…

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos