Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: AdBlue warning light

See other generations:
Video tutorial

In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as on its counterpart, the Citroen C3 with the same engine. Locate the filler cap in the boot of your car, underneath the spare wheel; then open the cap and top up the fluid, filling it to the maximum level.

Once filling is complete, get into the vehicle and check that the AdBlue warning light has reset (indicating that the refill has been done correctly).


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Where is the AdBlue Reservoir Located in the Peugeot 208?
Where is the AdBlue Reservoir Located in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) AdBlue is an essential element for the proper functioning of the vehicle's emissions system. The fluid is subject to wear, meaning you need to top it…
How to Refill AdBlue in the Peugeot 208
How to Refill AdBlue in the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This mini guide explains how to correctly refill the AdBlue fluid in the respective tank of the Peugeot 208. Remember, the vehicle must be completely…
How to Top Up AdBlue on a Peugeot 208?
How to Top Up AdBlue on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To top up the AdBlue additive on the Peugeot 208, lift the rear hatch of the boot. The cap for the additive tank is located under the mat: to access …

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - What does the AdBlue warning light on the Peugeot 208 indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos