|
Do it yourself
| |||
| ||||
How to change the brake pads of the Peugeot 208
Model: Peugeot 208
MK 1, A9
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To change the brake pads of the Peugeot 208, first we need to open the hood and unscrew the cap of the brake fluid reservoir, to release the pressure; loosen the wheel nuts, lift the car and place it on two jack stands for safety, then remove the front wheels. Insert a flathead screwdriver into the caliper hole, lever to push the piston back, and with a 13mm socket wrench remove the caliper bolts, which we will attach with a wire to the shock absorber coil. Remove the used pads, sliding them to the side; clean the seat with a wire brush and brake cleaner to remove rust and residue; then replace the anti-squeal shims. Apply copper grease to the pad supports and insert them into the caliper; reassemble it in place by tightening the bolts to 35 Nm. Repeat on the other side, reassemble the wheels, lower the car and pump the brake several times (with the engine off) to restore pressure.
Posted on 17 August 2025 by ScegliAuto
Related tutorials
Peugeot 208
(2012-2019 /
MK 1, A9)
Let's see how to replace the brake pads on a Peugeot 208: lift the car on a column lift (jack) to your desired height, then remove the wheel (using a…
Peugeot 208
(2012-2019 /
MK 1, A9)
How to replace the front brake pads on a Peugeot 208? Lift the car on a column jack to the desired height, then remove the wheel (using a telescopic …
Peugeot 208
(2012-2019 /
MK 1, A9)
In today's tutorial video, you will see how to remove and replace the front brake pads on the Peugeot 208. First, lift the vehicle and remove the fro…
Other guides you may be interested in
|
Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?
The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.069
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
