Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Transmission fluid

In this tutorial, you will see how to change the gearbox oil in a Peugeot 208, a very simple operation but one that requires good manual skills. First, lift the front of the vehicle, taking all necessary safety precautions, then remove the undertray, locate the drain plug, and unscrew it. Once done, allow all the oil in the gearbox to drain out, reinsert the plug, and locate the fill plug, which is just behind the left wheel. At this point, simply add the new oil and reassemble everything.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Peugeot 208?
How to Change the Engine Oil of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To change the engine oil of the Peugeot 208, lift the car so you can loosen the drain plug of the oil reservoir located at the bottom of the engine b…
Replace Oil Filter on Peugeot 208
Replace Oil Filter on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Replace the engine oil filter on a Peugeot 208? Replace oil and filter. Lift the front bonnet, unscrew the worn oil filter and fit a new one after dr…
How to change the air filter of the Peugeot 208
How to change the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you are looking for a guide to help you complete the replacement of the engine air filter for your Peugeot 208, then all you have to do is pay att…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos