Do it yourself
Frequently asked questions about cars and motorcycles

How do i replace the headlight bulbs of the Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Light bulb

In order to replace the low beam headlight bulbs on the Peugeot 208, the hood must be opened to gain access to the engine compartment. At this point it will be necessary to open the cover cap on the side of the grille: when it has been removed, it will be necessary to disconnect the connector by pulling it by its black part and not by the cables. At this point it will be possible to remove the old bulb from its connector and replace it by connecting the new bulb to the connector. This will then have to be inserted into the housing and sealed by inserting the cap again. The operation must be carried out for both lights.


Posted on 25 February 2024 by ScegliAuto



How to replace headlight bulbs on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How to replace the bulbs mounted in the headlight of a Peugeot 208? We open the front hood by pulling the lever located at the bottom right of the da
We replace burnt out bulbs on a front headlight of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) We replace the burned out bulbs on a front headlight of a Peugeot 208: open the front hood by pulling the lever located at the bottom right of the da
Peugeot 208 headlight bulb replacement
Peugeot 208 (2012-2019 / MK 1, A9) Replace the headlight bulb? Let's see how to replace the bulb from inside the headlight of a Peugeot 208. We open the hood of the engine compartment,

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos