Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Number Plate Light Replacement for Peugeot 208, 2008, 308, 3008

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

See other generations:
Video tutorial

Today, you will learn how to remove and replace the number plate bulbs on a Peugeot 208, as well as on the 2008, 308, and 3008. First, open the boot lid to a comfortable height for easier access. Then, use a flat tool like a screwdriver to lever off the light cover from the side where there is a slot, as shown in the video.

At this point, remove the old bulb and replace it with a new one of the correct type; simply insert it back and refit the light cover. Finally, perform the same operation on the other number plate light!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light in a Peugeot 208
How to Replace the Number Plate Light in a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the number plate light on your Peugeot 208 Mk1 is very simple, and with the procedure described in this guide, you will complete the task w…
How to Fix a Heating Problem in the Peugeot 208 (also 308 and 3008)
How to Fix a Heating Problem in the Peugeot 208 (also 308 and 3008)
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) The problem described in the video, common to the Peugeot 208/308 and 3008, is a fault in the fan resistor (or rheostat). This is an electronic compo…
How to replace the license plate light of the Peugeot 208
How to replace the license plate light of the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) In the following guide dedicated to those of you who own a second series Peugeot 208, we will explain in a simple and correct way how you can complet…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos