Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulbs on a Peugeot 208 is a very simple task that can be done independently, thanks to our short video tutorial. The first step is to open the tailgate and remove the covers on the sides of the panel; these can be removed using a flathead screwdriver.

Next, remove the inner panel of the tailgate. The second step is to use a TM10 key to remove the nut securing the left headlamp and disconnect the two connectors.

Then, push the headlamp outwards and remove it. The third step is to rotate the cap of the rear fog light and remove it to insert a BA15S bulb. Finally, refit the headlamp.

Repeat the same procedure for the right headlamp.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Replacement of the rear fog light bulb of the Peugeot 208
Replacement of the rear fog light bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light bulb of the Peugeot 208. First, we open the …
How to replace the front headlight bulb of the Peugeot 208
How to replace the front headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In a few steps, we will see how to disassemble and replace the dipped beam bulb of the front headlight of the Peugeot 208. First, we open the hood of…
Replacement of the turn signal light of the external rearview mirror of the Peugeot 208.
Replacement of the turn signal light of the external rearview mirror of the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) Shortly we will see the step-by-step instructions on how to disassemble and replace the turn signal bulb of the external rearview mirror of the Peuge…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos