Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the turn signal light of the external rearview mirror of the Peugeot 208.

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Side marker bulb

Shortly we will see the step-by-step instructions on how to disassemble and replace the turn signal bulb of the external rearview mirror of the Peugeot 208. First, let's move to the side of the car and start by removing the mirror glass, gently levering on the sides and disconnecting the small connector; now let's also remove the plastic cover, as shown in the video. At this point, disconnect the bulb socket to remove and replace the turn signal light with the new one, having the same fitting; then reassemble all the other components of the mirror!

Posted on 5 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the external rearview mirror of the Peugeot 208
Guide to replacing the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide will show us the process of disassembling and replacing the external rearview mirror of the Peugeot 208. First, we open the front door …
How to Replace the Indicator on the External Mirror of a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this video tutorial, you will learn how to replace the indicator on the external mirror of a Peugeot 208. This is not a very complex job, so you c…
How to Remove the Exterior Mirror of a Peugeot 208
How to Remove the Exterior Mirror of a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Before you can start, open the front door of your Peugeot 208. Begin by unclipping and removing the internal cover located near the exterior mirror. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos