Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the On-Board Computer in a Peugeot 3008?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Onboard computer

In this tutorial, see how to reset the on-board computer in a Peugeot 3008, a very simple and quick operation, for example, as a troubleshooting attempt or after a change of ownership. First, go inside the cabin, then insert the key and turn on the ignition. Next, access the general menu on the touchscreen display, go to "OPTIONS", "System settings", "Factory settings", "Reset", and confirm your choice. At this point, just wait for the system to reboot and check that the issues are resolved.

Posted on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the on-board computer of the Peugeot 3008
How to reset the on-board computer of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today we will see the instructions that will allow us to reset the on-board computer of the Peugeot 3008, in simple and quick steps. First of all, we…
How to set the time on the Peugeot 3008
How to set the time on the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) In this guide we will see the instructions that will allow us to change the time on the instrumentation of the Peugeot 3008. First, we get on board t…
How to Reset the AdBlue Warning Light on a Peugeot 3008
How to Reset the AdBlue Warning Light on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) The illumination of the AdBlue warning light on a Peugeot 3008 indicates a low level of fluid in the tank. To reset the warning light, you will need …

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos