Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Peugeot 307 CC

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Brake pads

In this short video, learn how to replace the brake pads on your Peugeot 307 CC. First, remove the wheel, then unscrew the bolts holding the brake caliper (the bolts are located at the rear of the caliper). Once done, you can pull out the brake caliper and remove the used pads. Before inserting the new pads, use a tool to push the pistons back to their resting position. Now you can insert the new pads and refit the caliper by tightening the bolts you removed earlier. Finally, remount the wheel.

Updated on 15 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Brake Pads on a Peugeot 307
Replacing Brake Pads on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Want to replace the brake pads on your Peugeot 307? Here’s how to remove the front brake pads. Lift the car on a column lift to the desired height, t…
Replacing Brake Pads on Peugeot 307
Replacing Brake Pads on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Are the brake pads due for replacement? Remove the wheel and replace the pads. Unscrew the retaining pin of the brake caliper and remove it from the …
How to Replace Front Brake Pads on a Peugeot 307
How to Replace Front Brake Pads on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the front brake pads and discs, lift the vehicle and remove the front wheel. Remove the caliper retaining pins and detach the caliper from…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos