Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Brake pads

Want to replace the brake pads on your Peugeot 307? Here’s how to remove the front brake pads. Lift the car on a column lift to the desired height, then remove the wheel (using a socket wrench or air drill) along with the respective bolts. Unscrew the caliper retaining bolt and remove the caliper from the wheel hub. Take out the worn pads from the caliper removed from above the disc. Refit the brake caliper with the support onto the brake disc, tighten all bolts, and remount the wheel. Replace the brake pads in pairs, both front and rear. Bleed the brake system if necessary.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on Peugeot 307
Replacing Brake Pads on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Are the brake pads due for replacement? Remove the wheel and replace the pads. Unscrew the retaining pin of the brake caliper and remove it from the …
How to Replace Brake Pads on a Peugeot 307 CC
Peugeot 307 (2001-2009 / MK 1) In this short video, learn how to replace the brake pads on your Peugeot 307 CC. First, remove the wheel, then unscrew the bolts holding the brake ca…
Replacing Brake Pads on a Peugeot 307
Replacing Brake Pads on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Open the bonnet and insert the support rod. Use a protective cover on the wing to avoid scratches and damage. Unscrew the cap of the brake fluid rese…

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - Brake wear warning light on Peugeot 307? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos