Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

Open the boot by lifting the lid and undo the side nut located on the side of the affected headlight, as shown in the video. Now move the inner lining of the boot to also undo the other nut. Once done, you can now extract the headlight from its housing and disconnect its connector. Next, remove the headlight from the inside, which is usually not visible. At this point, you will have in hand the structure to which the various bulbs are attached: you can then replace the burnt-out bulb, whatever it may be. Proceed in reverse for complete reassembly. Goodbye!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Headlight Bulbs in a Peugeot 307
How to Install Headlight Bulbs in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to install the bulbs in the headlight of a Peugeot 307? Start by removing the rear headlight and replacing the bulbs. Open and lift the tailgate …
Replacing Headlight Bulbs on Peugeot 307
Replacing Headlight Bulbs on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's see how to remove the front headlight bulbs on a Peugeot 307. Lift the front bonnet to access the rear of the headlight. Disconnect the cap fro…
Removing Front Headlight on Peugeot 307 - 307 SW
Removing Front Headlight on Peugeot 307 - 307 SW
Peugeot 307 (2001-2009 / MK 1) Learn how to remove and replace the front headlight and its bulbs on a Peugeot 307 and 307 SW. First, open the bonnet of your car and remove the plas…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos