Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

How to replace the rear headlamp bulbs on a Peugeot 307? This is a very simple operation. Open the boot lid, then remove the fabric cover located on the side trim. Unscrew the plastic retaining nuts of the rear headlamp, disconnect the power connectors attached to the headlamp, and pull it away from its housing. Once the headlamp is disconnected, replace the damaged bulbs with new ones (same voltage) at hand. Refit the headlamp with the respective retaining nuts and reattach the inspection cover.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Headlight Bulbs in a Peugeot 307
How to Install Headlight Bulbs in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to install the bulbs in the headlight of a Peugeot 307? Start by removing the rear headlight and replacing the bulbs. Open and lift the tailgate …
Removing Rear Light Assembly in Peugeot 307
Removing Rear Light Assembly in Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to remove the rear light assembly and replace the burnt-out bulb in a Peugeot 307. First, open the boot lid and remov…
Replacing the Rear Headlamp Bulb on a Peugeot 307
Replacing the Rear Headlamp Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Replacing the rear headlamp bulb on a Peugeot 307 is a very simple operation. Open the boot lid, then remove the fabric cover located on the side tri…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos