Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Seat

In this brief and simple video, you will see how to remove the rear seats of the Peugeot 207, following the instructions below. First, access the rear of your car and start by removing the seat bench; then use a 13 mm socket spanner to undo the screws located underneath, allowing you to lift them upwards and detach them. Once the seat bench is removed, you can also take off the backrests by unscrewing the bolts at the base; simply reverse the procedure for reassembly!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
How do you remove the seats in the Peugeot 207?
How do you remove the seats in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) The removal of the seats of the Peugeot 207 involves a specific procedure similar to that of the Peugeot 208, a car used in the video available here.…
How to Replace the Rear Seatbelt of the Peugeot 207
How to Replace the Rear Seatbelt of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the rear seatbelt of the Peugeot 207, following the instructions below. First, lower…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos