Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the seats in the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Seat

The removal of the seats of the Peugeot 207 involves a specific procedure similar to that of the Peugeot 208, a car used in the video available here. What needs to be done? Nothing complicated and above all there is no need to use special or particular equipment, simply a flathead screwdriver is needed and nothing else. The rear seats, in this case we are talking about them, in case there is a need to remove them, have two attachments under the seat and a slight pressure should be applied on these and then lever with the aforementioned screwdriver, in order to release them and then lift and extract the aforementioned seats.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the seats of the Peugeot 207?
How do you remove the seats of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In the Peugeot 207, the removal of the rear seats, let's focus on them, happens like in many other cars. Watching the video above, we notice that aft…
Removing the Rear Seats on Peugeot 207
Removing the Rear Seats on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To remove the rear seat base on a Peugeot 207, simply detach it by hand from underneath, as shown in the video. Once the seat is flipped up, you need…
How to Open the Roof of the Peugeot 207 CC?
How to Open the Roof of the Peugeot 207 CC?
Peugeot 207 (2006-2015 / MK 1) To open and close the roof of the Peugeot 207 CC, first remove the panel located at the rear of the seats, near the headrests. Once removed, go insid…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos