Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the battery of a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Battery
Operation: How to replace the battery of a Peugeot 207

The video shows how the battery of a Peugeot 207 can be replaced. It is a rather simple procedure. As a first step it is necessary to make sure that the car is off, apply the handbrake and open the engine compartment using the special lever. The battery box is positioned on the right, as a first step it is advisable to remove the battery cover, just pull the first half towards the other and then the other half as well. Use a screwdriver to push to remove the air manifold for more room to maneuver. Remove the control unit and pull it upwards. First remove the negative pole and then the positive.


Posted on 15 September 2022 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the battery in a Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos