Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the battery of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Battery

In a few simple steps, we will see how to disassemble and replace the battery of the Peugeot 207. First, let's open the car's hood and start removing the fuse box located at the top by taking off the plastic cover; then disconnect both battery terminals (positive and negative), and subsequently unscrew the bracket screw found at the bottom to remove the battery from its compartment, as shown in the video. At this point, let's install the new battery, of the correct type and with the same amperage, reassembling the plastic cover.

Posted on 18 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the battery in your Peugeot 207 key, you only need a few simple steps. By following this mini guide, you will complete the entire procedur…
Replacement of the starter motor of the Peugeot 207 1.6 HDi
Replacement of the starter motor of the Peugeot 207 1.6 HDi
Peugeot 207 (2006-2015 / MK 1) Today's guide will show us the instructions on how to disassemble and replace the starter motor of the Peugeot 207 1.6 HDi. First, we open the hood o…
How to replace the battery of the Peugeot 207 key
How to replace the battery of the Peugeot 207 key
Peugeot 207 (2006-2015 / MK 1) If you want to be able to replace the small battery inside the key of your Peugeot 207 by yourself, all you have to do is read the following guide an…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos