Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 4007
    4. : Where is the secondary fuse box of the Peugeot 4007

Peugeot 4007 - Video tutorial

Model: Peugeot 4007 MK 1 - Years 2007-2012
Part: Fuse box
Operation: Where is the secondary fuse box of the Peugeot 4007

There are two different fuse boxes inside your Peugeot 4007 from 2008. The first, the main one, is located inside the engine compartment while in the following mini guide we will find out where the secondary one is. Before proceeding, we remind you once again that any maintenance or replacement of fuses must be carried out only after disconnecting the car battery. Then open the driver's door and remove the dashboard side panel. Once this is done, you will finally have free access to all the cockpit fuses.


Posted on 13 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos