Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Remove the dashboard buttons and the climate control controls

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Air conditioning controls
Operation: Remove the dashboard buttons and the climate control controls

To disassemble the ESP buttons, central locking and the panel that controls the climate control system, it is necessary to remove the two lateral steel-colored plastics, also with the aid of a flat-head screwdriver, (we recommend using a piece of cardboard or thin plastic to contrast between the screwdriver and the car plastics). It is possible to remove the glove box by snapping it directly, while with a Torx screwdriver we have to remove the screws that hold the climate control mask firmly, remove the push-button panel that includes the command to deactivate the ESP and central locking, and finally press the two clips side to the climate control panel which constitute the final anchorage. The last operation consists in disconnecting the electric cables, after which we can completely extract the push-button panel.


Posted on 22 June 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos