Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the control panel of the air conditioner of the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: A/C controls

Video tutorial

The following steps will show us how to disassemble and replace the air conditioning control panel of the Peugeot 207. First, we get into the cockpit and start by removing the standard radio, inserting the appropriate extraction tools into the holes; we then remove the two plastic side covers, as shown in the video.

At this point, we unscrew the screws of the air conditioning control panel, disconnecting the electrical wiring at the back to remove it; we repair or replace the air conditioning control panel, reassembling all the components of the central instrumentation.


Posted on 7 October 2025 by ScegliAuto


Related tutorials

How to replace the bulbs of the air conditioning controls of the Peugeot 207
How to replace the bulbs of the air conditioning controls of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the bulbs of the air conditioning controls of the Peugeot 207. First…
How to Remove the Air Conditioning Controls from the Peugeot 207
How to Remove the Air Conditioning Controls from the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove the air conditioning controls and replace the bulbs in the Peugeot 207. First, get in the vehicle and start by…
How to Remove the Door Panel of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the passenger side door panel of a Peugeot 207? This video explains how to proceed. Before starting the disassembly work, disconnect th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos