|
Do it yourself
| |||
| ||||
How to Fix a Heating Problem in the Peugeot Traveller
Model: Peugeot Traveller
MK 1
- Years 2016-2024
In the video, the rear heating of the Peugeot Traveller is not working, and the front heating is also not functioning properly. The cause is the heating pump that has mechanically seized. Specifically, an internal blade has broken, blocking the rotation. The solution is to replace the auxiliary heating pump located at the rear of the vehicle: disconnect the pipes, remove it, and replace it with a new one. You can find it on Amazon with the code B07TC114MJ for £45.29, with free delivery. After replacement, it is crucial to bleed the air from the cooling system using a diagnostic tool to activate the automatic bleeding procedure. Alternatively, you can attempt a thorough manual bleed with the expansion tank open, engine running, and heating on maximum; then refill with the correct coolant, matching the colour of the fluid in the expansion tank. Bleeding is very important, as air in the circuit can make the heating inefficient and can cause the engine to overheat.
Posted on 12 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot Traveller
(2016-2024 /
MK 1)
To replace the engine air filter in your Peugeot Traveller (2016-2023), it only takes a few minutes. In fact, by following the steps outlined in this…
Peugeot Traveller
(2016-2024 /
MK 1)
In order to reset the Service light of the Peugeot Traveller, you need to press and hold the button with the icon of the English key located in the c…
Peugeot Traveller
(2016-2024 /
MK 1)
Replacing the battery inside the remote of your Peugeot Traveller is really simple, and with the steps described in the following guide, you will be …
Other guides you may be interested in
|
How to reset the tyre pressure warning light on a Hyundai Tucson
Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
