Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

Video tutorial

On this model from the French manufacturer, there are two fuse boxes. The first is located in the cabin on the left side of the steering wheel at the bottom of the dashboard, while the second box is in the engine compartment on the left side.

The fuse box in the dashboard contains, among others, the fuse for the fog light, front and rear wipers, electric window lifts, front and rear courtesy lights, the power socket, the audio and multimedia system, and the front and rear position lights.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram and Where is the Fuse Box of a Peugeot 307?
What is the Fuse Diagram and Where is the Fuse Box of a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Along with this article, a video is attached, showing the diagram and positioning of all the fuses for our Peugeot 307. Fuses serve to prevent damage…
Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, find out where to locate the internal fuse box and the diagram for the Peugeot 307, following the instructions below. Firs…
Fuse Box Diagram and Location for the Peugeot 307
Fuse Box Diagram and Location for the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This guide shows the diagram and location of the various fuse boxes for the Peugeot 307, following the instructions below. First, get into the vehicl…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos