Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Vapor Recovery Membrane Cover Kit on a Peugeot Engine

Model: Peugeot Peugeot Various
Part: Checks and maintenance

Video tutorial

In this video, we will see how to replace the cover and oil-vapour recovery membrane on a Peugeot 207 1.6. We notice that the part is leaking sludge: First, we will have obtained the part from an e-commerce site or a local parts dealer. Using an 8mm spanner, remove the engine cover, also taking off the oil cap. Use a screwdriver to pry up the cover to be replaced.

Clean the area thoroughly of dirt and debris. Immediately replace the oil cap, then fit the new part starting with the spring, then press down until you hear the click of the cap securing.

Now we can reattach the engine cover; however, we must remove the oil cap again. Secure the screws and close the cap. Job done.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Control Battery of Peugeot Cars?
How to Replace the Remote Control Battery of Peugeot Cars?
Peugeot Peugeot Various To replace the remote control battery of Peugeot cars, lift the key by pressing the appropriate button located at the top of the device. Once this is…
How to Replace the Cylinder Head Gasket on the Peugeot 1.4 Petrol
How to Replace the Cylinder Head Gasket on the Peugeot 1.4 Petrol
Peugeot Peugeot Various If you want to proceed with the replacement of the head gasket on this type of engine, you can find the necessary information to proceed in the descr…
Replacing Battery in Peugeot 308 2.0 BlueHDi
Replacing Battery in Peugeot 308 2.0 BlueHDi
Peugeot Peugeot Various In this video, you will learn how to replace the battery in a Peugeot 308 with a 2.0 BlueHDi engine. First, open the bonnet of the car and remove the…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos