Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Gasket on the Peugeot 1.4 Petrol

Model: Peugeot Peugeot Various
Part: Fuel injectors

If you want to proceed with the replacement of the head gasket on this type of engine, you can find the necessary information to proceed in the description below and in the video. First, unscrew the fixing bolts of the exhaust manifold, then remove the injectors, the intake manifold, and the rocker cover. Next, unscrew the fixing bolts of the cylinder head and then remove it. At this point, you can inspect the condition of the head gasket and proceed with its replacement if necessary. Finally, clean the surfaces of the new gasket seat thoroughly and reassemble all components in reverse order.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Audio and Multimedia System in a Peugeot Vehicle?
How to Reset the Audio and Multimedia System in a Peugeot Vehicle?
Peugeot Peugeot Various The solution proposed in the attached video tutorial is applicable to most Peugeot vehicles in case of sudden software lock and thus various function…
What is the BSI software of Peugeot cars?
What is the BSI software of Peugeot cars?
Peugeot Peugeot Various Intelligent Service Unit, this is the meaning of the acronym BSI and refers to Peugeot cars. In Italian, it translates as Intelligent Service Control…
How to clean the EGR valve on a Peugeot
How to clean the EGR valve on a Peugeot
Peugeot Peugeot Various Lift the bonnet and secure it, then remove the soundproofing panel covering the cylinder head from the engine compartment. Start by unscrewing the se…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos