Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the remote control for Peugeot vehicles 1007, 207, 307, 407, 208, and 308.

Model: Peugeot Peugeot Various
Part: Key

Video tutorial

The following video tutorial will show us the steps to replace the battery of the remote control for Peugeot vehicles 1007, 207, 307, 407, 208, and 308 independently. The battery to use for the replacement is a CR 1620 3 Volt. The steps to follow are: -insert the flat-tip screwdriver into the groove located on the bottom of the remote control; -open the remote control; -remove the microchip; -remove the battery; -insert the new battery; -insert the microchip; -assemble the remote control; -perform the test related to the functioning of the remote control.


Posted on 30 July 2025 by ScegliAuto


Related tutorials

How to replace the battery of the key remote control for Peugeot 208, 308, 508, 2008, 3008, 5008.
How to replace the battery of the key remote control for Peugeot 208, 308, 508, 2008, 3008, 5008.
Peugeot Peugeot Various Today we will discover the instructions on how to disassemble and replace the battery of the key remote control on various models of Peugeot (208, 30…
How to Replace the Remote Battery of a Peugeot
How to Replace the Remote Battery of a Peugeot
Peugeot Peugeot Various Peugeot vehicles produced from 2015 onwards feature the same car remote, allowing for battery replacement in the same way across many vehicles. To re…
How do you replace the battery of the Peugeot remote control?
Peugeot Peugeot Various In order to replace the battery of the Peugeot remote control, you can use a lever on the top of the device: this way, you can detach the panel on th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos