Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the EGR valve on a Peugeot

Model: Peugeot Peugeot Various
Part: EGR valve

Video tutorial

Lift the bonnet and secure it, then remove the soundproofing panel covering the cylinder head from the engine compartment. Start by unscrewing the securing bolts of the EGR valve.

Once the part is removed from its seat, use a screwdriver to unscrew the screws on it. Begin cleaning the valve using a suitable product for cleaning mechanical parts, and use a brush to assist with the process. Once the part has been restored, reassemble the components together.

Install the EGR valve back in the engine compartment and secure the engine cover parts. Start the engine and test its operation.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from the Peugeot 1.5 Blue HDi Engine
How to Remove the EGR Valve from the Peugeot 1.5 Blue HDi Engine
Peugeot Peugeot Various The EGR valve, used to recover some of the exhaust gases and direct them into the engine's air intake manifold, may not necessarily break over time, …
How to Replace the Cylinder Head Gasket on the Peugeot 1.4 Petrol
How to Replace the Cylinder Head Gasket on the Peugeot 1.4 Petrol
Peugeot Peugeot Various If you want to proceed with the replacement of the head gasket on this type of engine, you can find the necessary information to proceed in the descr…
How to Remove the Coolant Temperature Sensor from a Peugeot?
How to Remove the Coolant Temperature Sensor from a Peugeot?
Peugeot Peugeot Various Today, we will explain how to remove the coolant temperature sensor from a Peugeot. To perform this operation, open the front bonnet and remove the p…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos