Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Tail light

In this video tutorial, we will see useful instructions for disassembling and replacing the rear light and its bulbs of the Peugeot 206. First, we open the rear door and start removing the side lining. Then, we unscrew the plastic screw of the rear light, removing it from the outside, as shown in the video. At this point, we disconnect the electrical connector of the bulbs and separate the lamp holder from the lamp socket. We replace any faulty bulbs with new ones, having the same fitting, applying the reverse procedure for reassembly!

Posted on 11 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear fog light of the Peugeot 206
Replacement of the rear fog light of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light bulb of the Peugeot 206. First of all, let's…
How to replace the rear headlight bulb of the Peugeot 206
How to replace the rear headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to replace the rear headlight bulb of a 2001 Peugeot 206 car. To replace the bulb, we need to open the trunk and remove the…
How to replace the rear light bulb on a Peugeot 206
How to replace the rear light bulb on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, we will have to open the rear hatch of the luggage compartment of our Peugeot 206. So let's start by disengaging and removing the cl…

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos