Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

Model: Ford Focus MK 1 - Years 1998-2004
Part: Tail light

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Rear Light Bulb on Ford Focus 2016
Ford Focus (2011-2018 / MK 3) How do you change the bulb in the rear light of a Ford Focus? Let's see how to remove the rear light from inside the car's bodywork. Open the boot li…
How to Replace the Rear Light Bulb on a Ford Focus
How to Replace the Rear Light Bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you begin, open the boot of your Ford Focus. Start by unscrewing the screws securing the rear light. Next, pull the light out of its housing. …
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) In this guide, we will discover the information that will allow us to disassemble and replace the rear headlight and its bulbs of the Ford Focus. Fir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos