Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove and Replace the Rear Light of the Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Tail light

Today, you will see step-by-step instructions to remove and replace the rear light of the first series Ford Focus saloon. First, open the boot and start by unscrewing the rear plastic screw of the light; then unscrew the additional screws found on the side using a cross-head screwdriver, as illustrated in the video. At this point, disconnect the electrical connector of the bulbs to completely remove the light; if necessary, replace the bulbs and refit the new light, applying the reverse procedure!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear taillight of the Ford Focus
Replacement of the rear taillight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open…
How to Replace the Rear Light Bulb on a Ford Focus
How to Replace the Rear Light Bulb on a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you begin, open the boot of your Ford Focus. Start by unscrewing the screws securing the rear light. Next, pull the light out of its housing. …
Replacing Rear Bulbs on a Ford Focus
Replacing Rear Bulbs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the bulbs in the rear light of a Ford Focus. Open the tailgate to access the rear light, unscrew the securing screws on eithe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos