Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the battery on a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Battery
Operation: How to replace the battery on a Peugeot 207

How to replace the battery on a Peugeot 207? Let's see: we open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and raise the front hood, releasing the locking lever with the fingers, then, we secure the same with the rod . Once the engine compartment is open, we will find the battery to be replaced on the right. Unscrew the locking pins of the battery terminals with the appropriate socket wrench and disconnect the lock plate of the same (if present). We remove the old battery and mount a new one, tighten the power supply terminals. We close the battery compartment and close the engine hood.


Posted on 24 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the battery in a Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos