Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Roller of the Central Sliding Door of the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car door

See other generations:
Video tutorial

This operation is also valid for Citroen Relay, Fiat Ducato, Ram ProMaster, and similar models. If the door is hard to open and close but the roller is not broken, a height adjustment may suffice by loosening the locking nut with a T50 torx key and a 17 mm spanner.

If you need to replace the roller, open the door and place a support under the door to hold it up, as otherwise, the door may drop and misalign. The old roller is secured by T40 bolts; unscrew and remove them to pull the roller towards you and extract it from the guide.

You can find the new roller on Tarostrade with EAN code 3800997839327 for £44.06 + £6.49 for shipping. Set the roller to its lowest position to facilitate installation.

Insert it into the guide, sliding it in from above, reattach the two T70 bolts, and then adjust the roller height for smooth and aligned door operation. The Peugeot Boxer has two additional rollers: the lower one located at the bottom of the door, which should be cleaned with brake cleaner and lubricated with silicone spray, and an upper one: same procedure.


Posted on 1 November 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Peugeot Boxer?
How to Replace the Timing Belt on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To replace the timing belt on a Peugeot Boxer, lift the vehicle so that the front right wheel can be removed along with the corresponding wheel arch.…
A problem with the centralized locking system on the Peugeot Boxer.
A problem with the centralized locking system on the Peugeot Boxer.
Peugeot Boxer (2006-2024 / MK 2) A common problem that occurs on the Peugeot Boxer (and thus also on the Fiat Ducato and Citroën Jumper) is that the central locking does not work on …
Fuse Box Diagram and Location for the Peugeot Boxer
Fuse Box Diagram and Location for the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In today's tutorial video, we will look at the diagram and positioning of the fuse boxes for the second series Peugeot Boxer, as well as the Fiat Duc…

How to Open a Stuck Boot Lid on a Seat Ibiza

On a Seat Ibiza, the boot lid may become stuck, for example, due to a fault with the control button or the lock actuator. In these cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the backrest by operating the release lever. Next, go to the boot, unclip the cover panel of the boot lid, and open it by operating the actuator with a screwdriver or a similar tool.

Watch the video!


by ScegliAuto

More videos