Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Peugeot Boxer, lift the vehicle so that the front right wheel can be removed along with the corresponding wheel arch. Once these two components are completely removed, proceed to loosen the central nut of the tensioner pulley, allowing it to be removed and reducing the tension on the belt.

The old belt can now be slid out of its seat, and the new one can be inserted. After installing the tensioner pulley, apply tension to the new belt and check that everything is functioning correctly.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Peugeot Boxer 2.0 HDi
Replacing the Timing Belt on the Peugeot Boxer 2.0 HDi
Peugeot Boxer (2006-2024 / MK 2) Today's instructions will guide you through the main steps to disassemble and replace the timing belt on the Peugeot Boxer 2.0 HDi. First, open the b…
Guide to Replacing the Timing Belt on the Peugeot Boxer 2.0 BlueHDi
Guide to Replacing the Timing Belt on the Peugeot Boxer 2.0 BlueHDi
Peugeot Boxer (2006-2024 / MK 2) Today, discover the main instructions for removing and replacing the timing belt on the Peugeot Boxer 2.0 BlueHDi, as well as the Citroen Relay and F…
Replacing the Timing Belt on a Peugeot Boxer 2.0 HDi
Replacing the Timing Belt on a Peugeot Boxer 2.0 HDi
Peugeot Boxer (2006-2024 / MK 2) Let's discover how to remove and replace the timing belt on a Peugeot Boxer 2.0 HDi. First, open the bonnet of the vehicle and begin by disconnecting…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos