Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Peugeot 5008 - 3008

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Tire pressure warning light

Here are the instructions to reset the tyre pressure warning light on the Peugeot 5008 and 3008; before performing the reset, ensure all four tyres are at the correct operating pressure. First, get in the vehicle and turn on the ignition; navigate to the central display and go to the vehicle settings until you reach the tyre pressure option, as shown in the video. At this point, press the confirmation button to reset the warning light on the instrument panel!

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Peugeot 5008?
How to reset the tyre pressure warning light on the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) To reset the tyre pressure warning light on the Peugeot 5008, turn on the ignition so you can use the controls in the centre of the dashboard: press …
How to Activate Cruise Control on the Peugeot 5008 - 3008
How to Activate Cruise Control on the Peugeot 5008 - 3008
Peugeot 5008 (2017-2024 / MK 2) .. speed control on the Peugeot 5008, as well as the 3008. First, get inside the vehicle and start discovering the cruise control controls located on the.. …
How to Reset the Tyre Pressure Warning Light on the Peugeot 5008?
How to Reset the Tyre Pressure Warning Light on the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) To reset the tyre pressure warning light on the Peugeot 5008, turn on the instrument cluster and then press the button with the car icon located at t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos