Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 407
    4. : What is the fuse diagram for the Peugeot 407?

Peugeot 407 - Video tutorial

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Fuse box
Operation: What is the fuse diagram for the Peugeot 407?

If one or more devices in our Peugeot 407 have suddenly stopped working, the first thing we can do is check the status of the respective fuses whose diagrams are indicated in this video. As shown, we find the first box inside the passenger compartment, under the dashboard on the driver's side. The second box is instead located in the engine compartment, protected by the black plastic cover next to the battery. Make sure to replace any faulty fuse with an equivalent replacement, and always work with the vehicle turned off.


Posted on 22 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 407 2004-2012 - Where is the fuse box of the Peugeot 407 located? Read Answer
    • 407 2004-2012 - Where is the air conditioning fuse located in the 407? Read Answer
    • 407 2004-2012 - Where is the Peugeot 407 fuse box located? Read Answer
    • 407 2004-2012 - What is the Peugeot 407 central locking fuse? Read Answer
    • 407 2004-2012 - Where is the Peugeot 407 petrol pump fuse located? Read Answer
    • 407 2004-2012 - Peugeot 407 fuse box? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos