Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2025
Part: Warning light – error code

In this video, learn how to reset the service light on a 2019 Peugeot Expert after completing all scheduled maintenance. Turn on the ignition and press the button at the bottom of the display, where a spanner and a backward arrow are shown, simultaneously with the button at the other end marked "set 000". Press these two buttons long enough to start a countdown from ten. When it reaches zero, release the buttons and turn off the ignition. Turn it back on to check, and you will see that the light is off.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to Reset the Service Light on the Peugeot Expert?
How to Reset the Service Light on the Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To reset the service light on the Peugeot Expert, press and hold the button located on the right side of the instrument panel while it is off. Next, …
How to Reset the Service Light on a 2018 Peugeot Expert
How to Reset the Service Light on a 2018 Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) On all Peugeot vehicles, the procedure to reset the service light is similar. To reset the service light on a 2018 Peugeot Expert, first keep the ins…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos