Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Car Radio Display

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

Video tutorial

Obtain a replacement display. First, unscrew the two screws from the car radio control panel and gently pull it out of the support, being careful with the cables.

Next, unscrew the two screws from the display frame and remove it from the support by disconnecting the wiring connector. Ensure that the purchased display model is suitable by checking the mechanical dimensions and the code on the back.

Unscrew the two screws that secure the display to the frame and remove it. Move the wiring to the right side of the housing and install the new display in the frame, connect the connector, and position it in the housing. Screw in the two securing screws, reposition the radio panel, turn on the radio, and check for proper operation.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Peugeot 407 2.0 HDI
Guide to Replacing the Timing Belt on the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) The information illustrated below will show you how to remove and replace the timing belt on the Peugeot 407 2.0 HDI. In this case, we will see the r…
How to reset the service light on a PEUGEOT 407 SEDAN 2.0 HDI 2004
How to reset the service light on a PEUGEOT 407 SEDAN 2.0 HDI 2004
Peugeot 407 (2004-2012 / MK 1) Don't worry, it's quite simple! To reset the service light on your Peugeot 407 Sedan, sit in the driver's seat and follow these simple steps: press a…
How to Install an Android Radio in a Peugeot 407
How to Install an Android Radio in a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this video, learn how to install an Android radio in a Peugeot 407. Start by removing the previous unit: use the appropriate keys to take the devi…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos