Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a PEUGEOT 407 SEDAN 2.0 HDI 2004

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Service warning light

Don't worry, it's quite simple! To reset the service light on your Peugeot 407 Sedan, sit in the driver's seat and follow these simple steps: press and hold the odometer button (the one you use to reset the partial kilometers), then turn the key to "ON" without starting the engine. A countdown of 10 will start on the display. Continue to hold the button until the display shows "=0" or "Service reset", at that point you can release it. Turn off and on the ignition to verify that the light has disappeared. Done! No more annoying reminders, at least until the next service.

Posted on 12 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Peugeot 407?
How to reset the service light on the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To reset the service light, related to the maintenance, on a Peugeot 407 vehicle, you will need to follow a very simple and quick procedure that can …
Replacing the Glow Plugs on a Peugeot 407 2.0 HDi
Replacing the Glow Plugs on a Peugeot 407 2.0 HDi
Peugeot 407 (2004-2012 / MK 1) The instructions in this guide will illustrate the procedure for removing and replacing the glow plugs in the engine of a Peugeot 407 2.0 HDi. First,…
Guide to replacing the timing belt of the Peugeot 407 2.0 HDI
Guide to replacing the timing belt of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) The information provided below will show us how to disassemble and replace the timing belt of the Peugeot 407 2.0 HDI. In this case, we will see the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos