Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter on the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Cabin air filter

To maintain the efficiency of the cabin filter on the Peugeot 207, you need to periodically replace the filter elements. To do this, open the bonnet of the engine compartment; the two elements are located under the edge of the windscreen, and to access them, start by removing the wiper arms using a small puller, but first mark their position: this will be useful during reassembly. Remove the plastic panel covering the section under the windscreen and take the opportunity to clean it, as leaves and debris from outside accumulate in this area. For easier access, also remove the flap that separates this area from the engine. The filters to be replaced are located on the passenger side and can be easily removed by acting on some clips; when inserting the new ones, pay attention to the correct positioning. Once done, reassemble everything in reverse order.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair water leakage from the dashboard of a Peugeot 207
How to repair water leakage from the dashboard of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video we can see how to fix the problem of this Peugeot 207 that had water leaking into the cabin along the windshield; the pollen filter cov…
Where is the pollen filter located on the Peugeot 207?
Where is the pollen filter located on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) This short video shows the entire procedure for replacing the pollen filter on a Peugeot 207. First, ensure the handbrake is engaged for safety. The …
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos