Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

To reset the maintenance (service) light on the Peugeot 508, turn on the instrument panel and notice that the spanner light is on. Then, turn off the instrument panel and reset it; press and hold the button at the bottom of the odometer marked "000" while simultaneously turning on the instrument panel.

You will see a countdown appear on the display; keep holding the button marked "000" until the countdown finishes.

Once the countdown is complete, the service has been reset and the spanner light is off. Finally, check by turning on the instrument panel to confirm that the spanner light is not illuminated.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Top Up AdBlue and Reset the Warning Light on a Peugeot 508
How to Top Up AdBlue and Reset the Warning Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this guide, we will see the instructions to top up the AdBlue fluid and reset the warning light on a Peugeot 508. First, get inside the vehicle an…
How to Reset the Tyre Pressure Light on a Peugeot 508
How to Reset the Tyre Pressure Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this tutorial, see how to reset the tyre pressure light on a Peugeot 508, a very simple and quick operation to perform only after restoring the co…
How to Reset the Service Light on the Peugeot 508?
How to Reset the Service Light on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) Let’s see how to reset the service light on a Peugeot 508 from the first phase, produced until 2018. On the dashboard of this vehicle, there is a spe…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos