Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : What is the fuse diagram for the Peugeot 3008 van?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Fuse box
Operation: What is the fuse diagram for the Peugeot 3008 van?

If a device in our Peugeot 3008 has suddenly stopped working, the first thing we can do is check the status of the respective fuses whose diagrams are indicated in this video. As shown, the first box is located inside the cabin, specifically behind the small storage compartment on the driver's side. The second box is instead located in the engine compartment, protected by the black plastic cover right next to the battery. Make sure to replace any faulty fuse with an equivalent replacement, so as not to cause any damage.


Posted on 30 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - What is the fuse for the parking sensors control on Peugeot 3008 Mk1? Read Answer
    • 3008 2016-2023 - Where is the fuse box located in the Peugeot 3008? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 air conditioning fuse located? Read Answer
    • 3008 2009-2016 - Where are the relays on the Peugeot 3008 located? Read Answer
    • 3008 2016-2023 - Where is the Peugeot 3008 parking sensor fuse located? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 air conditioning fuse located? Read Answer
    • 3008 2016-2023 - Where is the Peugeot 3008 air conditioning fuse located? Read Answer
    • 3008 2016-2023 - Why does the on-board computer screen of a Peugeot 3008 not work? Read Answer
    • 3008 2009-2016 - Where is the Pegeout 3008 fuse box located? Read Answer
    • 3008 2009-2016 - Where are the fuses located in the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos