Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Cabin air filter

In this video, you can see where the cabin filter is located in the Peugeot 308 and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is located on the passenger side, right at the junction between the dashboard and the centre tunnel. To remove it, start by positioning yourself in the right seat, then remove the side panel by taking out the plastic rivet. Next, open the long rectangular flap, extract the old filter, and insert the replacement. Finally, reassemble everything by following the reverse procedure.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Peugeot 308
How to replace the cabin air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to replace the cabin air filter of the Peugeot 308 model 2, produced from 2013 to 2021 on your own. The cost of the cabin a…
How to replace the air filter of the Peugeot 308
How to replace the air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The following video tutorial shows us the steps to replace the air filter of the Peugeot 308 model mk2 on our own. To replace the filter, we need to …
How to Replace the Air Filter on a Peugeot 308
How to Replace the Air Filter on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To replace the engine air filter on your second-generation Peugeot 308 (2013-2021), carefully read the following guide. First, park your car on a fla…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos