Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Buttons of the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: A/C controls

To remove the climate control buttons of the Peugeot 307, loosen the screws that secure the plastic panel surrounding the climate control buttons: once this is removed, you will be able to locate the screws underneath that secure the actual panel to its housing. When these screws are also loosened, disconnect the connectors at the back and remove the panel: at this point, you can connect the new one, securing it in place with screws and repositioning the plastic cover.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Conditioning Compressor from the Peugeot 307
Removing the Air Conditioning Compressor from the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief guide, we will see how to remove and replace the air conditioning compressor of the Peugeot 307, following the instructions below. Firs…
How do you set the clock on the Peugeot 307?
How do you set the clock on the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To adjust the clock on the central display of the Peugeot 307, you will need to turn on the instrument panel and then press and hold the MENU button …
How to Set the Clock of the Peugeot 307?
How to Set the Clock of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To set the clock of the Peugeot 307, turn on the instrument panel and then press the MENU button located on the central control panel. Once this butt…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos