Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantle the central air conditioning console on a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: A/C controls

Video tutorial

Dismantling the central air conditioning console on a Peugeot 307? Start by removing the glove compartment under the radio, take out the ashtray, and unscrew the screws at the bottom of the console with a screwdriver. Detach the plastic cover from above the central dashboard.

Unscrew the tightening screws on the sides of the climate control console. Disconnect all electrical connectors located behind the control console.

Connect all the connectors to the new control console. Secure the console in the central dashboard, tighten the screws, and position the cover plastic.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Removing the Centre Console and Air Vents on a Peugeot 307
Removing the Centre Console and Air Vents on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's video, we will go through the instructions to remove the components of the centre console and the air vents on a Peugeot 307. First, get i…
Removing the Air Conditioning Compressor from the Peugeot 307
Removing the Air Conditioning Compressor from the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief guide, we will see how to remove and replace the air conditioning compressor of the Peugeot 307, following the instructions below. Firs…
How to Remove the Centre Console from a Peugeot 307
How to Remove the Centre Console from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to remove the centre console from a Peugeot 307: start by lifting the gear lever gaiter, remove the mat from the glov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos