|
Do it yourself
| |||
| ||||
How to Change the Shock Absorbers on a Peugeot 407
Model: Peugeot 407
MK 1
- Years 2004-2012
Hello, in this video, you will see how to replace the shock absorbers on your Peugeot 407. Once the car is raised on the ramp and the wheel is removed, start by unscrewing the bolt in the centre of the brake disc. There is a bolt underneath the discs; unscrew it and remove the pin. Next, unscrew the other bolts around the discs. Secure the brake discs to avoid issues during removal. Once done, proceed to the upper assembly. There are two bolts at the ends, between the windscreen and the bonnet. Remove the part and the plastic gasket. Continue by unscrewing the bolts perpendicular to the shock absorbers to remove the cover. By doing this, you will be able to take out the shock absorbers. Use a press to compress the shock absorbers and unscrew the top part. Also, remove both springs. Now, you can start fitting the new ones, always using the machinery. Then, mount them back onto your car by reversing the process.
Updated on 23 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 407
(2004-2012 /
MK 1)
Inside the Peugeot 407 there are three fuse boxes. The first fuse box is located inside the engine compartment, near the battery. The second fuse box…
Peugeot 407
(2004-2012 /
MK 1)
Learn how to remove the door panel of a Peugeot 407. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use…
Peugeot 407
(2004-2012 /
MK 1)
To correctly replace the front headlamp bulb in your Peugeot 407, follow the procedure described in this guide. First, ensure the car is parked safel…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.207
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |